SHARP 14R2DC
Owner's Manual

Timers
Reminder:
This function lets you know when a preset length of time has passed by displaying a � � mark on the TV set. This is useful for timer cooking while you watch TV. I Setting the Reminder
TV/VIDEO

! Press the TIMER button and the
� � mark appears.

1 4 7

2 5 8 0
CH CH

3 6 9

@ Press the VOLUME UP ( ) or
DOWN ( ) button to set the time. (Maximum time that can be preset is 12 hours and 50 minutes.) In this state, the Timer starts to count down.

@
FUNCTION TIMER PICTURE

!,#

SYSTEM NORMAL

# When you have finished setting
TV

the time, press the TIMER button 3 times. The on-screen display disappears.

I Action of the Reminder
5 minutes before the preset length of time has passed, the remaining time is displayed on the screen for 10 seconds. When the preset length of time (in the above example 3 hours and 30 minutes) has passed, the � � mark turns red. The Reminder function also works when the TV set is in Standby mode. Power is automatically turned on 5 minutes before the preset length of time has passed. After completion of above steps, the TV set returns to Standby mode automatically. (If you press any key before the TV set returns to Standby mode, the TV set remains on and does not return to Standby mode.)

(Example)

Flashing

Turns red for 1 minute.

Flashing

� � � �

To cancel the Reminder, press the NORMAL button during the Reminder mode. The minute setting of the timer is in 10-minute units. The Reminder is cancelled if the POWER (X) switch on the TV set is turned off or if the power is otherwise cut off. If approximately 6 seconds pass without a button being pressed, the mode setting is automatically terminated and the TV set returns to normal mode.

14