|
Who's Online
There currently are 6041 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
More than pleased with my prurchase, very good product for the price.
;
Manual-link came 30 minutes after having paid for an extremely rare (40 years old) item (sony icr-120) and helped me to get the radio rework again. So really good help for me, fast and reliable delivery and -taken that into consideration- a very reasonable price for that service. So thanks again! Mike, Germany
;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
FUNCTION OPERATION CHECKING (VIDEO AND AUDIO) CONTINUED HEADPHONE JACK CHECKING
1 HEADPHONE 1) Receive PAL COLOUR BAR with SOUND 400Hz, OUTPUT 100% MODULATION (±50kHz Dev). CHECKING 2) Maximum volume, and check the headphone output with 400Hz and no sound out from speaker.
No. point Adjustment procedure/conditions Waveform or others No. point Adjustment procedure/conditions Waveform or others
9 1) Receive the �PAL COLOUR BAR� signal, press MENU,
SYSTEM choose CH-SETTING to select COLOUR modes
except PAL, check the COLOUR is not working properly. Then, select the �PAL� mode. Check again its colour so that it is working properly.
2) Receive �SECAM COLOUR BAR� signal, press
MENU, choose CH-SETTING to select COLOUR modes except SECAM, check the COLOUR is not working properly. Then, select the �SECAM� mode.
SHOCK TEST CHECKING Check again its colour so that it is working properly.
No. point Adjustment procedure/conditions Waveform or others
3) Receive �NTSC 4.43� signal, press MENU, choose
CH-SETTING to select COLOUR modes except N443, check the COLOUR is not working prop1 SHOCK TEST 1) Hit at the top of TV set for two time. erly. Then, select the N443 mode. Check again 2) Check set not damage and TV operation opits colour so that it is working properly. erate correctly.
4) Receive �NTSC 3.58 COLOUR BAR� signal thru
AV, press MENU, choose CH-SETTING to select COLOUR modes except N358, check the COLOUR is not working properly. Then, select the N358 mode. Check again its colour so that it is working properly.
10 SOUND 1) Receive �PAL-D/K� signal, press MENU, choose
SYSTEM CH-SETTING then go into SOUND mode to se-
lect B/G, I, M. Check the sound output is not working properly.Select D/K and check the sound output to make sure it is working properly.
2) Receive �PAL-I� signal, press MENU, choose CH-
13
13-1 13-2
SETTING then go into SOUND mode to select B/ G, D/K, M. Check the sound output is not working properly. Select I and check the sound output to make sure it is working properly.
3) Receive �PAL-B/G� signal, press MENU, choose
CH-SETTING then go into SOUND mode to select I, D/K, M. Check the sound output is not working properly. Select B/G and check the sound output to make sure it is working properly.
4) Receive �NTSC-M� signal, press MENU, choose
CH-SETTING then go into SOUND mode to select B/G, I, D/K. Check the sound output is not working properly. Select M and check the sound output to make sure it is working properly.
11 NOISE MUTE 1) Receive �PAL COLOUR BAR� signal.
CHECKING 2) Turn up the volume control to maximum, make
sure sound is heard from the speakers. Then put the unit in no signal state.
3) Check the sound mute is effective. 4) Finally turn sound level of CTV to minimum.
12 Check OSD LANGUAGE quantity and type for
LANGUAGE respect model. (2 LANGUAGE) QUANTITY CHECK QUANTITY ENGLISH RUSSIAN
2 O
21E1-FRU
|
|
|
> |
|