There are currently no product reviews.
Very good quality. Some parts are not fully readable, but the fundamental ones are fine.
very good quality readable manual,printed off very well.
The manual was very accurate for the part that I was changing, I was able to order the correct part and had no issues with the replacement procedure. However, I was expecting to have more detailed repairs for the lower drive unit.
I needed the manual immediately and I got it immediately. I couldn't find this manual anywhere else on the net. The site was easy to traverse, and the price was very reasonable. I'll definitely be back for any future needs.
I received a good service manual, with good resolution. Improve the instructions for the purchase because they are not well understood.
For the rest, so good.
LED FLASHING CODE
PURPOSE: The led indicates the power mode, occurred I2C error and On timer
Current power mode - I2C Errors - On timer
Processing: - If in STANDBY mode and On timer inactive then switch LED off. - If in STANDBY and On timer active set LED to blinking, (switch on and off at 1 Hz with a 50% duty cycle). - If in POWER-ON mode, switch LED on. - If an I2C error occurred, let the LED blink at 1 Hz, 50 % duty cycle. For the blinking times see the Table below.
Note: Only when an I2C error occurs for a number of times, or for a number of seconds, the I 2C error is handled by the system (that is ,only then the set will go to standby, the led starts blinking).
Bus Error LED Remarks Blinking Time 2 3 6 6 512x8 EEPROM,1024x8 EEPROM Address of internal TV processor PLL Tuner
M24C04, M24C08 TDA935x/6x/8x VTST6HD64 or CTF551 Table Error LED blinking times
A0,A2 8A C0 C0
IC1002 IC801 TU201
PRINTED WIRING BOARDS
F 7341N0 PWB. Components side.
1 Y 0 X 1 2 3 4 5 6 7 8 9 10