There are currently no product reviews.
have download a number of manuals todate , most are excellant, one or two sometimes a little difficult to read but a least avaialable, great site .
Excellent had everything I wanted, very happy with purchase
This service is relatively cheap, document is fast available, schematic is readable.
So far I´m a satisfied customer. I have only downloaded "TECHNICS SX-KN470 Service Manual" maybe I will use it later.
Good manual. It is complete and of high quality, both text and graphics. The schematics are with the original big size, so it can be viewed or printed without any loss of resulution and sharpness.
MEMORY MAP HOTEL MODE APPLICATION
(Continued) How to enable/disable the "Hotel Mode" ?
Ans: a) Press the Menu key.
DATA ADDRESS MICON EEPROM CHASSIS CTV FINAL LAST INITIAL (HEX) D7 D6 D5 D4 D3 D2 D1 D0 DEFAULT RANGE WRITE(CPU) CHECK TYPE SETTING DATA REMARK
b) Using CH key, move cursor to FEATURE. Press the UP or VL DW key.
c) Using UP or CH DW key, move cursor to BLUE BACK on the menu screen.
d) Hold down digit key (-/--) of remote control for 5 seconds or more, and the Hotel Mode will be made
e) Key in four digits password starting with number "1", "3", "7", "9", then the hotel mode will be enable, you can switch on/off the hotel mode by using R/C (volume up/down) key. 2CB
HOTEL ON 2CF Set vol up/down by R/C key. PASSWORD ****
Input 1,3,7 and 9 by R/C key. 2D2
#1 Ch 1 is your selected channel 2D6 Before the hotel mode, it is better choose ch 1 & set s-vol level Up to 75% full scale.
for hotel mode. * We recommend 2D8
After hotel mode, starting channel always ch 1 & maximum sound level out will be set the half of full scale. (Note: If sound volume set to any level below 30, the setting is taken as maximum.) 2DC
* If set hotel mode in AV, starting channel will be the last ch which you received before power off (same as normal operation) 2DF
When using hotel mode, user can control "contrast", "brightness", "sharpness" and "tint" function. 2E9 But after power off, it will return to the initial setting. You can't use:-2EB
Preset mode Fine tuning 2EE
Skip mode System selection 2F1 The others function is allowed to be used. 2F2