perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 9 (click to view)
CAUTION
� Do not allow the signal receiver window to receive strong direct sunlight, since it can adversely affect its operation. If the signal receiver window is exposed to direct sunlight, close a curtain to block the light. � Using a fluorescent lamp with a quick starter in the same room may interfere with transmission of the signal. � The unit can be affected by signals transmitted from the remote control of a television, VCR or other equipment used in the same room. � Do not leave the remote control in direct sunlight or near a heater. Also, protect the unit and remote control from moisture and shock which can discolour or damage them.
SET CURRENT CLOCK TIME
There are two clock modes: 12-hour mode and 24-hour mode. Example: 5 o'clock in the afternoon
Clock Display
12-hour mode 24-hour mode
PM 5:00 17:00
MODE
1h
1 To set to the 12-hour mode, press the 2 3 1 2 Press the TIME ADVANCE or REVERSE
button to set the current time. To set to the 24-hour mode, press the CLOCK button twice in the first step.
CLOCK button once in the first step.
CLEAN FAN SWING SET/C
� Keep the button pressed to advance or reverse the time display quickly.
3 Press the SET/C button.
� The colon (:) blinks to indicate that the clock is functioning.
NOTE:
� The current time cannot be set when the timer is operating.