|
Who's Online
There currently are 6010 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
I Recently purchased yet another Service Manual from Owner-Manuals.com, this time for a Sony EVS700ES/UB Videocassette Recorder. The Manual was available for upload within two hours and is an Extremely Good copy, as some of this I was able to enlarge to get even better detail.
Once Again, Very happy with the result!
;
A good and useful manual. With these, We was abled to isolate and pin point the component that was causing the problem. The total time spent in troubleshooting is very much reduced.
;
The quality of the manual is top. The transfer worked perfect and fast.
No problems at all. Recommendable
;
Very good service for get any documentation. Fast and perfect quality.
;
Excellent service manual with all the necessary info. :)
(8)
Remove the screw, and remove the no. 2 mirror (fθ mirror) (S005/Ua001/P004).
* Cleaning
Use absolute alcohol to clean the No. 1 cylindrical lens (S005/ Ua001/P010).
S005/Ua001/P010/CLN
S005/Ua004/P004/CLN
Use absolute alcohol to clean the scanner mirror (motor) unit, and the laser beam sensor. Clean the whole surface of the scanner mirror (motor) unit as shown in the figure below.
S005/Ua001/P005
* Cleaning
Use absolute alcohol to clean the concave surface of the no. 2 mirror (fθ mirror). (9) Remove the scanner cover. (10) Remove the screw and the connector, and remove the scanner mirror (motor) unit (S005/Ua001/P005).
* Troubles caused by improper work
1) Print image defect (Insufficient print density) (Streaks in the main scanning direction) (Image lack) (E7-03 error) (15) Remove the MCU (PCU) PWB S009/Ua002 . (16) Remove the power PWB unit. S009/Ua001 . (17) Remove the scanner (writing) unit. S005/Ua001 . (18) Remove the screw and the connector, and remove the toner empty sensor (S005/Ua001/P011).
(11) Remove the screw, and remove the laser unit (S005/Ua001/ P006). (12) Remove the connector, and remove the laser beam sensor PWB (S005/Ua001/P007). (13) Remove the screw and the spring, and remove the paper feed solenoid (S005/Ua001/P080). (14) After removing the laser beam sensor PWB, remove the paper empty detector (S005/Ua001/P009) along the boss direction.
S005/Ua001/ P005
9 � 20
$4.99 AL800 SHARP Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft…
|
|
|
> |
|