This is exactly what I needed This was a hard one to find and I had already downloaded several for other Panasonic radios but none matched my radio.
Although my radio is the LBE model the LBS is the same.
A very good quality manual with every thing you should get in it
Excellent printing quality.
A complete and very usefull service manual with all details.
GREAT SERVICE AT VERY LOW PRICE!
A+++++++++++++++++++++++++
Text excerpt from page 179 (click to view)
Menu COUNTER DATA CLEAR Counter data clear. Used to clear each counter value. (LCD display)
Content
Initial value
Set range
XXXXX COUNTER CLEAR
*Pressing the [ ] or [ ] key selects the counter group for the counter clear mode. *Pressing [OK] key displays the counter clear group. *Using [MENU] moves to the next mode *Pressing the [ ] or [ ] keys changes the YES or NO. *Pressing [OK] key starts the counter data clear mode. *Pressing [BACK/C] key terminates the counter data clear mode. COUNTER CLEAR: FEED COUNTER CLEAR TRAY1 TRAY2 LCC1/TRAY3 LCC1/TRAY4 MFT ADU Paper feed tray 1 counter Paper feed tray 2 counter Paper feed tray 3 counter Manual paper feed counter Duplex counter DEVE COUNTER CLEAR DEVE DRUM TONER TOTAL OUTPUT Developing counter Drum counter Toner counter Copy counter (Effective paper counter) Drum motor RPM Developing motor RPM DRUM COUNTER CLEAR
LCC1 or paper ray tray 4 counter TONER COUNTER CLEAR OUTPUT COUNTER CLEAR
STAPLE COUNTER CLEAR
STAPLE PUNCH
Staple counter Punch counter
TIMER DATA CLEAR DRUM ROTATION DEVE ROTATION
MNT COUNTER CLEAR MENTENANCE Maintenance counter TROUBLE CANCEL X Trouble cancel. Used to cancel a trouble code. (LCD display)
TROUBLE CANCEL X
*Pressing the [ ] or [ ] key selects the trouble cancel mode. *Pressing [OK] key start the trouble cancel mode. *Using [ ] and [ ] keys changes the YES or NO. *Pressing [OK] key starts the trouble cancel mode. *Pressing [BACK/C] key terminates the trouble cancel mode. X: E-TBL E-U2 C-TBL XXX SIZE SETUP Cancel troubles except for U2 in the engine mode. Cancel U2 trouble in the engine mode. Cancel trouble in the contoroller mode. Tray1 Set value A4 *Pressing the [ ] or [ ] key select the tray. *Pressing [OK] key displays the tray size. *Using [ ] and [ ] keys changes the tray size. *Pressing [OK] key set the change of the tray size. *Pressing [BACK/C] key terminates the setting. XXX: TRAY1 LCC TRAY1 LCC B5 8.5"x11" LCC Set value A4 8.5"x11"
Tray size setting. Used to set the paper size on No. 1 paper feed tray and the LCC tray. (LCD display)
