Excellent service from this company (including a total refund on an earlier purchase when through no fault of the company the manual was incomplete). I have purchased several manuals which I have been very satisfied with, as I am with this one. Highly recommended.
Manual was delivered in a timely manner and was all in English as advertised. The manuals I received when we moved into our flat were in German, Italian, and French. Having never used a steamer before, and not speaking/reading German very well, I needed an English Manual. this was a huge help.
This GRUNDIG UV5A Owner Manual is not only an instruction manual but a total functional circuit description of the Multimeter and includes circuit diagram at the end pages. It is very helpful for repairing and calibrating the instrument. It is written in two languages English and German for international support. It was very easy to repair my unit with this document. Regards, Regis Pauly, Electrical Engineer.
Text excerpt from page 88 (click to view)
FINISHER
Staple cartridge replacement
When the staple cartridge becomes empty, the message �Add staples.� will appear in the message display of the operation panel. Follow the procedure below to replace the staple cartridge.
1 Open the front cover.
NOTES q Do not remove the tape from the cartridge before inserting the staple cartridge into the box. q When reinstalling the staple box, push it in until it clicks into place.
6 Remove the tape from the staple cartridge
by pulling it straight.
2 Turn the staple unit to face up.
7 Reinstall the staple box. 3 Pull the release lever for the staple box and
remove the box.
Push the staple box in until it clicks into place.
8 While pushing the staple unit release lever 4 Remove the empty staple cartridge from the
staple box. to the left, rotate the staple unit to face down.
9 Close the front cover. 5 Insert a new staple cartridge into the staple
box aligning the arrow of the staple cartridge with that of the staple box.
NOTE Make a test print or copy in the staple sort mode to ensure that stapling is performed properly.