|
Who's Online
There currently are 5797 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
;
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
;
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
;
It is an very good and clear scanned service manual.
very recommended.
;
Easy to order the manual. Good quality and fast delivery.
CD-C477H
� Playback can only be performed when a disc is loaded.
Is the Focus servo active? (Can you hear it working?) Yes Yes Does the DRF signal change from "L" to "H"? Yes Yes Is HF waveform normal (see the Fig.51-1, 2)? Yes Check the tracking system. Waveform is unstable.
0.5s 1.00 V IC1 16 FD 0.5s 10.0 V IC2 13 CLV+ 0.5s 10.0 V IC1 54 DRF 0.5s 2.00 V IC1 7 TE
No
Check the laser diode driver. Check the area around IC1(16) - (21) (focus servo circuit).
No
If the disc is not turning, the DRF should not change to "H".
Check the spin system.
No
Level is abnormal. Yes
Check the periphery of IC1 pins 41 and 42.
Check the spin system.
Waveform in case of normal play-back
HF 1.0V/DIV 0.5µsec/DIV(DC) (When playing back the disc)
2 1 3 4
Figure 51-1 � Check the tracking system.
Figure 51-2
Check waveform of IC1 pin 7 (TE).
The waveform shown in Fig.51-3 appears, and nodisc state appears soon.
Yes
Tracking servo is inoperative. Yes
Check the periphery of IC 1 pin 8 to pin 15, and IC 3 to CNP2.
Play is possible in TEST mode.
Yes
Although IL is possible, play is impossible.
Yes
Normal jump is impeded, and the program top cannot be reached.
Yes
Check the periphery of IC 1 pin 14.
Data cannot be read.
Yes
Check the VCO-PLL system.
5ms 1.00 V IC1 7 TE
4
5 ms 5.0 V IC1 54 DRF
3
Figure 51-3 � 51 �
|
|
|
> |
|