|
|
|
Who's Online
There currently are 5734 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Thank you very much for the manual. It is what I needed and it will be very helpful to me. The delivery of the manual was easy and very fast. I strongly recommend this site to other users. Best regards.
 ;
Excellent!! Got what I need and very fast!! Thank You
;
Manual acquired with good resolution, complete in all its pages, very good policy of the folder where are saved all products purchased.
;
Service manual very complete and clear. It was very helpfull for my work.
;
This is the 2nd time I download manuals from this website and I can say it's what I was expecting. It contains schematic, layout (decent quality), short description, parts and dissasembly instructions. I recomend it for anyone who wants to repair/modify this device.
CD-MD3000H/CD-MD3000W
� The spindle motor does not rotate.
Is waveform output from the pins 24 and 25 of IC1201 in the step 4 of AUTO auxiliary adjustment mode of TEST mode? Yes Is waveform output from the pins 9 and 10 of IC1601 and the pins 5 and 6 of CN1402? Yes Replace with a spindle motor (complete). Check IC1601, CN1402, and soldering of mechanism switch PWB. No No Check the pins 24 and 25 of IC1201, soldering of peripheral circuit, and parts.
� The sled motor does not rotate.
Do the pins 22 and 23 of IC1201 change with the button? No Do the pins 14 and 15 of IC1601 and the pins 3 and 4 of CN1402 change with the / button? Yes Does voltage of the + and - terminals on the sled motor change with the / button? Check the soldering connected to the sled motor and for disconnection. No Check IC1601 and soldering of CN1402. / Yes Check the waveform of pins 22 and 23 of IC1201, peripheral parts, and soldering.
No
Yes Replace the sled motor.
� 93 �
|
|
|
> |
|
