|
Who's Online
There currently are 5615 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Received a quick response, material was exactly what it was supposed to be. The service did everything I expected it to do. would use service again.
;
Detailed SONY CFD980 Service Manual at an easy to find one stop shopping. Make my radio hobby technically interesting. Thanks.
;
Excellent service from Owner-Manuals.com, good prices and quick turn around. The supplied PDF was good enough quality to be enlarged sufficiently to read component values.
;
Very complete shop manual. It contains everything needed to troubleshoot bascially any problem. Instructions, diagrams, schmeatics, illustrations... it's all there. Highly recommended!
;
Great product, very good quality, found all needed information. Thanks
FU-21SE-S
How to assemble the FERRITE CORE
(1) At first , pass the AC cord ass'y through the hole of the back panel. (2) By passing three times the connector side of AC cord ass'y through the hole of the ferrite core, make two circles near the cord bushing .
AC CORD ASS'Y
3. Removing the display PWB CAUTION The LED guide cannot be removed from the display PWB. (Because of the LED for cluster lamp.)
LED GUIDE LED (CLUSTER LAMP)
FERRITE CORE
DISPLAY PWB
(3) Pass the two circles to the boss .
BOSS
CONNECTOR D
(1) Remove the fixing screws (5 pcs.), pull out the connectors D and G (on the relay PWB) to take out the display PWB.
SCREWS DISPLAY PWB
(4) Insert the AC cord angle to the cord bushing , tighten the AC cord ass'y to the casing with the screw. 2. Removing the switch PWB (1) Pull out the connector (CN-E) of the switch PWB and remove the screws (2 pcs.). Then, take the switch PWB out of the switch PWB guide. CAUTION When taking out the switch PWB, be sure not to lose the button and the switch spring.
SWITCH PWB CONNECTOR (CN-E) SWITCH PWB GUIDE CONNECTOR D CONNECTOR G
4. Removing the power supply PWB (1) Remove the display PWB and pull out the connector (CN-D). (2) Remove the top PWB box. (3) Pull out the connector (CN-A/CN-B/CN-C/CN-F) on the power supply PWB to remove the PWB.
BACK PANEL SWITCH PWB
BUTTON SWITCH SPRING
SWITCH PWB GUIDE
5. Removing the relay PWB (1) Remove the connectors G and H. (2) Hold the head of the spacer A and take the relay PWB out of it.
CONNECTOR H
SPACER A
SWITCH PWB
CONNECTOR G
14
|
|
|
> |
|