perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 25 (click to view)
EXAMPLE OF APPLICATION
Mounting the LCD monitor on a wall
Note: I Consult with your dealer and authorized shop before installation. (Various materials are used for wall. Some materials may not be strong enough or thick enough to hold the mounting screws in place or support the weight of the set.)
Drill holes measuring 0.3 in. (8 mm) in diameter on the wall (hollow wall, plaster board). Insert the supplied anchors into the holes, and strike the heads of the anchors with a hammer until the anchors are securely installed in the wall.
1.6 in. (40 mm)
0.3 in. (8 mm) Ã¸
Note: I The supplied anchor screws are inserted in anchors. Remove the screws from the anchors before installation.
Anchor Screw (Supplied) 0.5 in. (12.5 mm)
Position the supplied wall mount bracket in place using the anchor screws. Tighten the anchor screws securely. CAUTION: â¢ The wall mount bracket must be installed with four anchor screws. Be sure to thighten so that it will not fall down under a pulling force of at least 44 lbs (20 Kg). â¢ The anchors are designed for plaster boards with a thickness of 0.5 in. (12.5 mm). For a 0.4in. (9.5 mm) thickness board or a wooden wall, find similar anchors or screws at a hardware store.
Wall Mount Bracket (Supplied)
Mount the back stand of the main unit on the wall mount bracket with the supplied fixed screw.
Wall Mount Bracket (Ã 1)
Anchor and Screw (Ã 4) * To change the vertical angle of the monitor, tilt the screen up to 8Â° downward. Adjust the angle of the monitor for the most comfortable viewing. Fixed Screw (Ã 1) (Supplied)