There are currently no product reviews.
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
It is an very good and clear scanned service manual.
Easy to order the manual. Good quality and fast delivery.
Error messages Meaning Remedy
replace alkaline battery (or use the (Lo BATT)
The run down. q Charge the rechargeable battery or BATT EMPTY
AC adaptor for power).
BLANK DISC Nothing is recorded. q Replace the disc with a recorded disc. (BLANK) Canât COPY No copy can be made because of q Record using the analog cable.
and then try editing it.
SCMS copyright system. (Not REC)
Canât EDIT A cannot be edited. q Change stop position of the track
Recording cannot be performed q Re-record or replace it with another Canât REC
(Not REC) the unit.
correctly due to vibration or shock in recordable disc.
Canât WRITE Editing is impossible. q Check the number of tracks.
q Replace the disc with another (DEFECT) recordable disc.
DEFECT recording again.
The disc scratched. q If the sound you hear is not right, try
Din UNLOCK Poor connection of cable. q Connect the digital cable securely. (UNLOCK)
The disc is out of recording space. q Replace it with another recordable disc.
The unit is in hold mode. q Return the HOLD switch to its original (HOLD) position. LOCKED The EJECT lever was moved during q Turn off power and remove the
recording or editing. MiniDisc. LOCK ERROR
NO DISC A disc has not been loaded. q Load a disc.
PB DISC disc.
You tried to record on playbackonly q Replace it with a recordable disc.
POWER ? sources.
Improper is being supplied. q Use one of the specified power
The MD is protected. q Move the write protection knob back to q You tried to record without loading an its original position.
A playback-only MD was loaded and q Replace it with a recordable MD.
q Load a recordable MD. PROTECTED
REC button was pressed when the power was off.
READ ERROR The is damaged. q Reload the disc or replace it. (E-READ) q Replace it with another recorded disc.
Since track number is currently being q Wait for a while and try the operation SORRY
(SORRY) accept your command.
located or written to, the unit cannot again.
SYSTEM ERR You come conclusion that q To have it repaired, go to the distributor (E-SYS) unit is out of order. where you purchased the unit. TEMP OVER The temperature is too high. q Turn off the power, and wait for a while. (E-TEMP) TOC ERROR A large portion of the disc has been q Replace it with another recorded disc. (E-TOC) damaged.
There is no space left for recording q Replace it with another recordable disc.
TOC FULL character information (track names,
disc names, etc.).
being erased. it was recorded.
The has been protected from q Edit track with the device on which Tr. Protect
U TOC ERROR A large portion of the disc has been q Replace it with another recorded disc.
(E-UTOC) q There is an error in the recorded signal. try recording again.
damaged. q Erase all of the signal errors, and then
? DISC music was cannot be played.
other than q A disc which contains non-music data
There is an error in signal from the q Replace it with another recorded disc. (?DISC)
( ): Error messages seen on the remote control.