SHARP MX-FNX1
Service Manual

(9)
1) 2) 3) 4)

Take-up belt, paper exit roller
Remove the inner finisher from the main unit. Refer to A-(1). Remove the inner cover. Refer to A-(2). Remove the reverse guide unit. Refer to A-(5). Remove the parts, and remove the bundle roller up/down lever unit.

7)

Remove the parts, and remove the take-up belt and the paper exit roller.

3

1
2 1

2

2
1
5) Remove the parts, and remove the bundle roller unit.

2 1

2

3

1

1

(10) Inlet port gate
1) 6) Remove the parts, and pull out the belt unit. Remove the parts, and remove the belt unit. 2) 3) 4) 5) 6) 7) Remove the inner finisher from the main unit. Refer to A-(1). Remove the inner cover. Refer to A-(2). Remove the left cover and the bottom cover. Refer to A-(4). Remove the reverse guide unit. Refer to A-(5). Remove the PWB. Refer to F-(1). Remove the flapper solenoid. Refer to B-(2). Remove the slide rail. Remove the slider fixing bracket and remove the earth terminal.

3 1

3 2

1
2

MX-FNX1/MX-PNX1 DISASSEMBLY AND ASSEMBLY 6 � 4