5. Insert the Product Recovery CD-ROM disk 1 into the Optical drive. 6. In the Exit menu, select Load Setup Defaults; then, press Enter twice. 7. In the Exit menu, confirm Exit Saving Changes is highlighted and press Enter twice. The system restarts. 8. Read the message on the screen; then, press Enter. 9. Read the message on the screen and select Continue; then, press Enter. Although the pointer may be shown on the screen, never touch the keyboard or the glide pad during recovery except when the message prompts you to. If you touch them, the re-installation will be canceled. 10. If you see the message asking you to replace the CD-ROM, remove the Product Recovery CD-ROM disk 1 and insert the Product Recovery CD-ROM disk 2; then, click OK. 11. If you see the message The hard disk has been recovered successfully, the Optical drive will be opened automatically. Remove the Product Recovery CDROM disk 2. The system restarts automatically. 12. Set up Windows XP, following the instructions on the screen. Make sure to set date and time. When you finish the setup, the recovery is completed.