There are currently no product reviews.
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
Super nice! Good to have a manual in digital format.
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
I Cleaning the tape-handling I Cleaning the cabinet parts Periodically wipe the cabinet with a soft cloth
G Dirty heads, capstan or pinch roller can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol. G After long use, the deckâs heads and capstan may become magnetised, causing poor sound. Demagnetise these parts once every 30 hours of playing/recording by using a commercial tape head demagnetiser. Read the demagnetiserâs instructions carefully before use. and a diluted soap solution, then wipe with a dry cloth. Caution: G Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the cabinet finish. G Do not apply oil to the inside of the unit. It may cause malfunctions.
Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (tape heads, etc.). Condensation can cause the unit to malfunction. If this happens, leave the power on with no cassette in the unit until normal playback is possible (about 1 hour).
SHARP reserves the right to make design and specification changes for product improvement without prior notice.
Power source Power consumption Output power Speaker Output terminal Dimensions AC 110-127/220-240 V, 50/60 Hz DC 6 V [âDâ size (UM/SUM-1, R20 or HP-2) battery x 4] 7W MPO: 3 W (AC operation, 10 % T.H.D.) RMS: 1.5 W (DC operation, 10 % T.H.D.) 9.2 cm (3-5/8â) full range speaker x 1 Earphone: 16-50 ohms (recommended: 32 ohms) Width: 305 mm (12â) Height: 155 mm (6-1/8â) Depth: 120 mm (4-3/4â) 1.48 kg (3.3 lbs.) without batteries
Frequency range FM: 88 - 108 MHz SW1: 2.3 - 7.3 MHz SW2: 7.3 - 22 MHz MW: 526.5 - 1,606.5 kHz
I Tape recorder
Frequency response Signal/noise ratio Wow and flutter Motor Bias system Erase system 60 - 12,000 Hz (Normal tape) 40 dB 0.3 % (WRMS) DC 6 V electric governor DC bias Magnet erase
QT-222W(B)_E.pm 13 03.10.24, 11:55 AM
Complete service manual in digital format (PDF File). Service manuals usually contains circuit diagr…