|
Who's Online
There currently are 5733 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Yes thank you i got the file i was after. There was a slight problem in my communication but it all worked out well.
A job well done.
;
Great manual...really saved me. The only problem is that I thought I would be able to download it directly when I paid for it but never received the download instructions until the next morning. The board trace pages were somewhat light also: really need to turn up the contrast on the printer before printing them. The schematic page was great; very clear! Well worth the money.
;
I've been in the electronic business for a long time. I used to buy Sam's Photofact for my needs which intailed having to go to the store and paying about $20 for a package of 3 different units so I was forced to buy more than I needed just to get one.
Owner manual is just at your keyboard and the information is almost instantansouly and the cost is very reasonable. Easy to print out if needed or simply read off of the screen. The larger the screen the better for obvious reasons.
;
Very good manual, at a very good price. Received in a timely manner
;
Only thу cover has poor quality, internal material has excellent quality - exactly what I needed
Thanks!
3'
4'
(7)
Use a half-tone document and make a 100% copy on B4 or 8 1/2" x 14" paper in the half tone mode.
Make copies at the max. enlargement ratio and the min. enlargement ratio.
Check the uniformity.
Measure the distances between the copy image lead edge and the copy paper lead edge of the max. enlargement copy and the min. enlargement copy, and compare the two.
Is the uniformity OK ?
NO
Change the installing position of the exposure adjustment plate to adjust the uniformity. 0 ± 1.0 mm ?
NO
Change the Sim50-1 set value A so that the difference is within the specified range.
YES Put the scale to the document reference plate and set in the paper transport direction.
YES
5'
Make a 100% copy with Sim50-1. Set the Sim45 set value to "0." Measure the distance between the copy image lead edge and the copy paper lead edge.
Is the SPF installed ?
NO
Change the Sim50-1 set value B so that the difference is within the specified range. (Zoom model) Change the Sim50-1 set value A so that the difference is within the specified range. (Non zoom model)
YES
0 ± 1.0 mm ?
NO
Is it the zoom machine ?
5
YES
6
(8)-a
YES
Set the Sim50-1 set values A and B to "0."
Is the SPF installed ?
NO
Make copies at the max. enlargement ratio and the min. enlargement ratio.
(8)-a
Make a copy on B4 or 8 1/2" x 14" paper at the max. enlargement ratio and the min. reduction ratio in the document table mode.
YES
YES
NO
Set the Sim50-1 set values A, B, and C to "0."
Use the SPF to make a 100% copy.
Measure the distances between the copy image lead edge and the copy paper lead edge of the max. enlargement copy and the min. enlargement copy, and compare the two.
Measure the distance between the copy image lead edge and the paper lead edge of each copy. L1 = Distance in the max. enlargem ent ratio Distance in the min. reduction L2 = ratio
Measure the distance (L3) between the copy image lead edge and the copy paper lead edge. 0 ± 1.0 mm ? Calculate the Sim50-1 set value from the following formula. C8 = 8.0906 x L3 NO
Change the Sim50-1 set value C so that the difference is within the specified range.
(8)-b
Make a 100% copy in the document table mode and check the lead edge
Calculate the Sim50-1 set value from the following formula. A = 8.243 x (L1 - L2) B = 16.0668 x L2 -7.9661 x L1
Set the Sim50-1 set value.
void area. (Document table mode)
0 +3 mm ? -0 Set the Sim50-1 set values A and B. YES
YES
NO
Change the Sim45-1 set value to adjust the void area.
6
YES
Use the SPF to make a 100% copy and check the lead edge void area. (SPF mode)
Is the SPF installed ?
4
NO
Use a black color document and make a 100% copy on the A4 or 8 1/2" x 14" paper
YES
0 +3 mm ? -0
NO
Change the Sim45-1 set value to adjust the end edge void area.
NO
0 +3 mm ? -0
Change the Sim45-1 set value to adjust the lead edge void area.
YES
End
7�5
$4.99 SF2014 SHARP Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft… $4.99 SF-2014 SHARP Parts Catalog Parts Catalog only. It's available in PDF format. Useful, if Your equipment is broken and You need t…
|
|
|
> |
|