|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Dear Sirs,
Thank you for the fast support, the manual does provide all necessary information to repair the radio. All schematics are in a good quality for reading.
The manual fits 100% to my requirements as a technican.
Kind regards Thomas
;
the big video recorder format s-vhs many features delicate in loading system of the cassette. Such machines are no longer manufactured, it would be too expensive.
;
THIS MANUAL IS VERY GOOD AND VERY CLEAR
PLEASE NOTE IT DOES NOT CONTAIN THE SETUP INFORMATION TO ALIGHN THE GEARS IN THE CD MECH IT DOES SHOW ALL THE PARTS AND THEIR LOCATIONS .
;
Complete service and operation manual. All schematics are there, all circuit boards AND add-on boards. Including exploded views ,component names and specifications. Also electrical and mechanical adjustment procedures are in this manual. This manual also covers the more advanced BR-S811E unit. Scan quality is fair and usable.
;
High quality scan of original Service Manual. Everything´s fine!
NO.22 Hi-Fi TROUBLESHOOTING(2) (Hi-Fi Models) FLOW CHART NO.24 LINEAR SOUND MODE TROUBLESHOOTING (1)
VC-A310X/NZ VC-H725X VC-H730X/NZ
No linear sound recording (E-E mode is possible) No Hi-Fi sound recording(E-E mode is possible)
NO Check the AUDIO MUTE (H) line between pin
Is there "L" level at pin (99) of IC201? (99) IC201 and pin (81) of IC701.
NO Replace IC651. YES
Check peripheral circuit of IC651 as YES shown in table. Is there a signal at pin(4) of IC201? Replace IC201.
L-ch pins(16),(17),(18),(19)
R-ch pins(35),(34),(33),(32) NO
Is the supply voltage 12V fed to pin(2) of Check PC 12V line.
YES YES
YES T601? Check Hi-Fi 5V line.
NO
Is there signal (Bias) at pin (5) of T601? Q603) and FE BIAS CTL line.
of IC651?
NO Is there signal (Bias + Audio sig.) at pin (6)
YES of T601? NO Is the supply voltage of 5V fed to pin(25)
Check the Bias oscillation circuit(T601,Q602,
Is there REC FM signal outputted to the pins(21) (24)(ch-1)/pins(21) to (22)(ch-2)
of IC651 ? YES
YES Check peripheral circuits of T601.
Is there H level at pin(29) of IC651? Check AH-MZ harness.
YES
NO YES
Check the MH-AM harness and A/C head.
Check or replace the cylinder. Check the Hi-Fi CTL (H) line between pin (29) IC651and pin(22) of IC701.
FLOW CHART NO.25 LINEAR SOUND MODE TROUBLESHOOTING (2) YES No linear sound playback (E-E mode is possible) Check the record AGC setting resistor
R678 at pin(37) of IC651.
46
Is there a signal at pin(100) of IC201?
YES YES
Are MH-AA harness and the PB AMP. Replace IC651. NO peripheral parts normal?
FLOW CHART NO.23 Hi-Fi SOUND MODE TROUBLESHOOTING(3) (Hi-Fi Models) Clean A/C Head.
YES
No Hi-Fi sound playback(E-E mode is possible) NO Is the azimuth height of A/C head properly
adjusted?
Replace IC651. YES
YES Replace A/C head.
Readjust azimuth height. Is there playback envelope signal(about NO Is the supply voltage of 5V fed to pin(25) 300mVp-p) outputted to the pins(29),(30) of IC651? NO
of IC651? A-H.SW.P. signal pin(27) Is there "L" level at pin (99) of IC201? YES (99) IC201 and pin (81) of IC701. IC651?
NO
Check the AUDIO MUTE (H) line between pin
YES Check peripheral circuit of IC651 as shown in table. NO
L-ch pins(16),(17),(18),(19) Check the A-H.SW.P. line between pin
Is there a signal at pin(11) of IC201? Replace IC201.
NO
R-ch pins(35),(34),(33),(32) YES (27) IC651 and pin(28) of IC701.
YES Is there audio signal inputted at pin(62) Check line between pin (11) of IC201 and
Replace IC651. IC651? pin (62) of IC651.
|
|
|
> |
|