Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
Text excerpt from page 8 (click to view)
INSTALLING YOUR VCR
TUNING THE TV INTO THE VCR
1. Press the
STANDBY button to ensure your VCR is in the STANDBY mode.
2. Press and hold the
button located on VCR front panel for 3 seconds. The VCR will search and display an ideal channel. Wait for the flashing channel number to appear on the VCR display. Example
CAUTION:
If the clear button is pressed at this point it will not allow the TV to be tuned to the VCR. Refer to RF through ON/OFF below.
3. Switch on the TV.
4. Select the next available or unused channel on your TV, this will become the dedicated
video channel. Example of TV channels
1 = BBC1 2 = BBC2 3 = ITV 4 = Channel 4 5 = Channel 5 ? = VCR
5. Tune the selected channel on your TV until the screen below appears.
MENU SCREEN
ME NU V I D EOP L U S T I ME R MOD E SE T UP
(Blue background with white text)
SET
: SE L ECT : ENT ER
ME NU : E X I T
Store this as your VCR channel. (Refer to your TV manual for instructions on how to tune in your TV).
6. Press the NOTES:
�
button to place the VCR back into STANDBY. (The MENU screen will not be displayed when the VCR is in STANDBY mode.) If you have a preferred channel, the RF channel can be set manually (21-69) after Step 2 using [ / ] keys. If you wish to connect your VCR to the TV with only a scart lead, the RF Output on your VCR can be turned OFF and ON by pressing the CLEAR button then SET to return to STANDBY at point 2. This will help minimise interference. If problems persist contact the SHARP Helpline on tel: 0990-274277
5
