|
Who's Online
There currently are 5959 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
VERY GOOD SERVICE.FAST ANS VERY HONEST PRICE .RHAANK HERNAN
;
Thanks to this service manual I repaired my old camcorder! The manual perfectly explains how to disassemble the camcorder step by step.
;
This manual is very useful because it presents the technical specifications of the cd player, including the manufacturer of the reader, this helps if you need to replace it. It also displays the settings and layout of the circuit.
;
Manual was a good representation of service infomation for the EWV404. It worked well for my repair.
;
Great quality copy, right what I was looking for, all I need to fix my radio.
Thanks
XL-45H
� HF error.
Is output (tracking error signal) obtained at the pins 33 (TE) and 37 (TRCRS) of IC801 the CD TEST MODE "STEP 4" is changed to "STEP 5"? Yes
test mode "step 4" test mode "step 5"
No
Is output obtained at the pins 2 and 5 of CNS802 No Yes Check the periphery of IC802. Check the PWB pattern between pin 20 (TEOUT) of IC802 and pins 33 and 37 of IC801. Is it normal ? Yes
Optical pickup failure.
IC801 is faulty. No
TE TRCRS
Check the PWB pattern between pin 33 (TE) of IC801 and pin 19 of IC804. Check the periphery of IC804 and CNW801/CNS801. If OK. Optical pickup failure. Is output (HF signal) obtained at the pin 44 (ARF) of IC801 when the CD TEST MODE "STEP 4" is changed to "STEP 5"? Yes
test mode "step 4" ARF test mode "step 5"
No
Is output obtained at the pins 1 and 3, 4 of CNS802. No Yes
Optical pickup failure.
Check the periphery of IC801. Check the PWB pattern pin 44 (ARF) of IC801. If OK. IC802 is faulty
Is output (HF signal) obtained at the pin 38 (/RFDET) of IC801 when the CD TEST MODE "STEP 4" is changed to "STEP 5"? Yes
test mode "step 4" test mode "step 5"
No
Check the periphery of IC801. Check the PWB pattern pin38 (/RFDET) of IC801. If OK. IC802 is faulty.
/RFDET
Is the following wave output to the pin 10 (VIN2) of IC804 when the CD TEST MODE "STEP 4" or "STEP 5"? Yes
VO2 test mode "step 4" test mode "step 5"
No
Check the periphery pins 52~53 of IC801. If OK. IC801 failure.
Normal.
� No sound.
No sound from both L and R-ch? No Yes No Is signal of pins 73 and 75 of IC801 output? Yes Check the peripheral parts of IC801. If OK, IC801 is faulty. Check the interval between the pins 73 or 75 of IC801 and the pins 1 or 3 IC601.
The main PWB is faulty.
� 39 �
$4.99 XL-45H SHARP Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft…
|
|
|
> |
|